CARBON REMOVER

 


APPLICATIONS

CARBON REMOVER / CARBON REMOVER NC is used undiluted
for breaking down and separates residual combustion products and
by-products distillation of mineral oils. Suitable for cleaning burner tips,
lube / fuel oil filters, oil coolers, fuel injectors and machines parts.

DIRECTIONS FOR USE

SOAKING
Burner tips, oil filters, injectors and machine parts can be cleaned
effectively by soaking in a tank of undiluted CARBON REMOVER
/ CARBON REMOVER NC. Put the components in the tank and
soak for 2 to 10 hours depending on the degree of soiling. Most
deposits can be removed at ambient temperatures. If deposits are
particularly hard to dissolve, heat up to maximum of 50°C in a properly
ventilated area.

CIRCULATION
Heavy oil heaters, heat exchangers, oil coolers and equipment not
possible to be dismantled for cleaning by soaking may be cleaned
effectively by circulating undiluted CARBON REMOVER / CARBON
REMOVER NC through the equipment for 4 to 10 hours depending
on the degree of soiling. Remove excessive deposits by blowing
compressed air or steam through the system prior to circulation.

NATURE OF SPECIAL RISKS AND SAFETY ADVICE

In accordance with the latest EEC Council directives this product is
subjected to:


R24/25 : Toxic in contact with skin and if swallowed
R34 : Causes burns
R40 : Possible risks of irreversible effects
R50/53 : Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
R65 : Harmful, may cause lung-damage if swallowed
S2 : Keep out of reach of children
S23 : Do not breathe gas, fumes, vapor, spray
S24/25 : Avoid contact with skin and eyes
S26 : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S28 : After contact with skin wash immediately with plenty of water
S36/37/39: Wear protective clothing, suitable gloves and eye / face protection

S45 : In case of accident or if you feel unwell, seek medical advice immediately (show the label if possible)
S60 : The material and its container must be disposed of as hazardous waste
S61 : Avoid release to the environment. Refer to special instructions / safety data sheets
S62 : If swallowed do not induce vomiting, seek medical advice.
Immediately show this container or label

 

Solvent emulsifier for removal
of carbonaceous deposits



- Quickly dissolves deposits containing carbon, resins or varnishes
- Eliminates need for hand scraping
- Simple and economical to use
- Soaking and circulation makes dismantling of parts unnecessary
- High flash point solvent


PRODUCT CHARACTERISTICS

Appearance: brown / amber liquid
Corrosive action: none
Specifc gravity: 1,1 (20°C)
Flash point: >61°C

IMO Class: 6,1 / II
UN Number: 2076
ADR: 6.1,27b)